Cart0

Hardware

Dog seat belts and car restraints

A dog seat belt keeps your dog on the back seat instead of moving around loose: one end clips to your dog’s harness, the other plugs into the car’s seat belt socket or an ISOFIX point. MoodTag is an Australian brand specialising in premium Never-Fall dog ID tags for active dogs, and we also make three car restraints: two seat belt tethers and a bungee leash that works on walks and in the car. Each one has a shock-absorbing bungee and ships free by tracked Parcel Post anywhere in Australia. Always clip a dog car seat belt to a properly fitted harness, never to the collar.

MoodTag SecureRide bungee dog leash with car seat belt buckle

Seat belts and leash

  • SecureRide Bungee Leash

    SecureRide Bungee Leash

    $39.90

    Walk-ready. Car-ready. Built for active dogs who do not sit still.

    SecureRide Bungee Leash is made for everyday walks, weekend adventures, and safer car rides with your dog.

    Designed with a shock-absorbing bungee section, heavy-duty metal carabiner clip, soft rubber grip, reflective centre stripe, and car seat belt buckle attachment, it gives you a more controlled leash setup whether you are walking, travelling, or getting your dog in and out of the car.

    The elastic bungee helps soften sudden pulls, while the soft rubber traffic grip gives you closer control when you need it most: near roads, car parks, busy paths, or other dogs. The reflective stitching adds extra visibility in low light, making it a practical choice for early morning walks, evening strolls, and everyday Australian dog life.

    For the car, the built-in seat belt buckle attachment helps keep your dog more secure during travel and reduces loose movement on the back seat. For best safety, attach the car restraint to a properly fitted dog harness rather than directly to a collar.

    Why Dog Owners Love It

    • Shock-absorbing bungee design helps soften sudden pulling
    • Heavy-duty metal carabiner clip for a stronger leash connection
    • Built-in car seat belt buckle attachment for travel use
    • Soft rubber grip for comfort and closer control
    • Reflective centre stripe for improved visibility in low light

    Normal length: 120 cm
    Stretched max length: 178 cm
    Designed for active dogs, strong pullers, daily walks, and car rides

    CustomiseLoading Done This product has multiple variants. The options may be chosen on the product page
  • RideGuard Adjustable Seatbelt Tether

    RideGuard Adjustable Seatbelt Tether

    $16.90

    RideGuard Adjustable Seatbelt Tether is made for safer, more controlled car travel with small to medium-sized dogs.

    Designed with an elastic bungee section, adjustable webbing strap, metal swivel clip, reflective stitching, and a built-in seatbelt buckle insert, it helps reduce loose movement on the back seat while giving your dog enough room to sit, lie down, or change position comfortably.

    The bungee section helps soften sudden movement during braking or changes in speed, while the adjustable buckle allows you to customise the length to suit your dog and available seat space. The 360-degree swivel clip helps reduce twisting and tangling as your dog moves, and the reflective stitching makes the tether easier to see in low-light conditions.

    The seatbelt buckle insert connects directly to a compatible vehicle seatbelt socket, creating a simple car restraint setup for everyday trips, vet visits, and weekend outings.

    For safer use, always attach the tether to a properly fitted dog harness rather than directly to a collar.

    Why Dog Owners Love It

    • Elastic bungee section helps soften sudden movement
    • Adjustable strap helps create a more suitable fit
    • Built-in seatbelt buckle insert for convenient car use
    • 360-degree swivel clip helps reduce twisting and tangling
    • Durable woven webbing for everyday travel
    • Reflective stitching for improved visibility in low light
    • Approximate standard length: 55 cm
    • Approximate maximum length after stretch: 70 cm
    • Compact design suited to small and medium-sized dogs
    • Ideal for daily drives, vet visits, and shorter road trips

    Colour

    • Grey
    • Black

    Important Sizing Note

    This tether is best suited to small and medium-sized dogs. It may be too short for taller dogs or dogs that need more room to sit upright and move comfortably in the car.

    Safety Note

    This product is designed to help restrain your dog and reduce loose movement inside the vehicle. It is not a crash-tested safety device. Always connect it to a properly fitted dog harness and check that the seatbelt insert and clip are securely attached before travelling.

    CustomiseLoading Done This product has multiple variants. The options may be chosen on the product page
  • RideGuard Dual-Connect Bungee Car Tether

    RideGuard Dual-Connect Bungee Car Tether

    $21.90

    With Seatbelt Buckle & ISOFIX Anchor Hook

    RideGuard Dual-Connect Bungee Car Tether is designed to help keep your dog more secure and better controlled during car travel.

    Featuring both a built-in seatbelt buckle insert and an ISOFIX anchor hook, it gives you two practical ways to secure your dog in the rear seat or boot area, depending on your vehicle setup. The adjustable strap and shock-absorbing bungee section help reduce sudden pulling and allow you to create a more comfortable amount of movement for your dog without leaving them completely loose in the car.

    The tether adjusts from approximately 54 cm to 72 cm, with the bungee section extending up to approximately 90 cm under tension. This makes it easier to customise the fit around your dog, harness, seating position, and available space.

    A heavy-duty screw-lock carabiner attaches securely to your dog’s harness, while the reflective stitching provides extra visibility when handling the tether in low light. The 360-degree swivel connection also helps reduce twisting as your dog changes position.

    For safer use, always attach the tether to a properly fitted dog harness rather than directly to a collar.

    Why Dog Owners Love It

    • Dual-connect design with a seatbelt buckle insert and ISOFIX anchor hook
    • Adjustable length to suit different dogs and vehicle layouts
    • Shock-absorbing bungee section helps soften sudden movement
    • Heavy-duty screw-lock carabiner for a stronger harness connection
    • 360-degree swivel helps reduce twisting and tangling
    • Reflective stitching for improved visibility in low light
    • Suitable for rear-seat and boot-area restraint setups
    • Designed for active dogs, strong dogs, road trips, and everyday car travel

    Adjustable Length

    Shortest length: 54 cm
    Adjusted length: 72 cm
    Maximum length after stretch: 90 cm

    Safety Note

    This product is intended to help restrain your dog and reduce loose movement inside the vehicle. It is not a crash-tested safety device. Always connect it to a properly fitted dog harness and check that all clips and attachment points are secure before travelling.

Compare

Which dog seat belt should I choose?

Choose the RideGuard Seatbelt Tether for a small or medium dog on everyday trips, the Dual-Connect Car Tether for a bigger or stronger dog or a boot setup, and the SecureRide Bungee Leash if you want one lead for walks and the car.

UseLengthConnects to the carClips to the harnessSuitsExtras
RideGuard Adjustable Seatbelt TetherCar onlyAbout 55cm, stretches to 70cmSeat belt buckle360-degree swivel clipSmall and medium dogsReflective stitching
RideGuard Dual-Connect Bungee Car TetherCar onlyAdjusts 54 to 72cm, stretches to about 90cmSeat belt buckle or ISOFIX anchor hookScrew-lock carabiner, 360-degree swivelActive and strong dogs, rear seat or bootReflective stitching
SecureRide Bungee LeashWalks and car rides120cm, stretches to 178cmSeat belt buckleHeavy-duty metal carabinerActive dogs and strong pullersSoft rubber traffic grip, reflective stripe

How to use

How do you use a dog seat belt?

Put a well-fitted harness on your dog, clip the tether to the harness, then push the buckle end into a rear seat belt socket until it clicks.

  1. Harness first. Fit it snugly, following the harness maker’s sizing guide.
  2. Clip to the harness, on the back clip, never the collar.
  3. Plug in the buckle (or hook the Dual-Connect onto an ISOFIX point) until it clicks.
  4. Set the length so your dog can sit, stand and lie down, but can’t reach the front seats or the window. The RSPCA says a restrained dog in the back seat is the safe set-up.
  5. Check it before you drive: the buckle clicked, the clip is closed, nothing twisted.

The rules

Is it illegal to have an unrestrained dog in the car in Australia?

Driving with a dog on your lap is an offence across Australia, and dogs on a ute tray must be restrained everywhere; inside the car, the rules differ by state.

Whatever your state, a restrained dog is safer for everyone in the car. Check your state’s road rules for the current fines.

Safety

Should a dog seat belt go on the collar or a harness?

On a harness, always. A tether clipped to a collar puts any sudden stop on your dog’s neck; a properly fitted harness spreads it across the chest. Every RideGuard and SecureRide product page says the same.

Honest limits

Are dog seat belts crash tested?

Most aren’t, and ours aren’t either: our tethers keep your dog in place and stop it moving around the car, but they are not crash-tested safety devices. The RSPCA notes there is no formally recognised Australian standard for crash testing dog car restraints, and Standards Australia has said there is no national standard for their design. If crash protection matters most to you, pair a tether with a harness sold as crash tested, or use a crate strapped into the car.

Where to sit

Front seat or back seat?

The back seat. A restrained dog behind you can’t distract you or end up on your lap, and RACV advises against the front seat because airbags could seriously injure your dog.

The bungee

Why a bungee section?

The bungee softens sudden pulls, on the lead and in the car. On a walk it takes the jolt out of a lunge; in the car it softens movement when you brake or change speed, while still giving your dog room to sit or lie down.

Common questions

Dog seat belt FAQs

Can you put a regular seat belt on a dog?

No, a car seat belt is made for people and doesn’t fit a dog. Use a dog seat belt tether that clips to your dog’s harness and plugs into the seat belt socket.

Do dog seat belts really work?

Yes, for keeping your dog in place: a tether stops your dog moving around the car or onto your lap. It is not crash protection unless the whole set-up has been crash tested.

Does the car tether fit my car?

The seat belt buckle insert fits a compatible seat belt socket, and the Dual-Connect also has an ISOFIX anchor hook for cars with ISOFIX points.

Will the seatbelt tether suit a big dog?

No, the RideGuard Seatbelt Tether is made for small and medium dogs and may be too short for taller dogs, so choose the Dual-Connect Car Tether instead.

How long should a dog seat belt be?

Long enough for your dog to sit, stand and lie down, and short enough that it can’t reach the front seats or put its head out of the window.

Can I clip the tether to my dog’s collar?

No. Always clip it to a properly fitted harness, so a sudden stop doesn’t land on your dog’s neck.

Is shipping free?

Yes. Any order with a car tether or the SecureRide Bungee Leash ships free by tracked Parcel Post anywhere in Australia.